Harbor Freight Tools 8 in. Bench Grinder with Gooseneck Lamp Manual descarregar pdf (Página 11)

Page 11For technical questions, please call 1-888-866-5797.Item 37823

SAFETYOPERATIONMAINTENANCE SETUP

Workpiece and Work Area Set Up

1. Designate a work area that is clean and well-lit.

The work area must not allow access by children

or pets to prevent distraction and injury.

2. Route the power cord along a safe route to reach

the work area without creating a tripping hazard or

exposing the power cord to possible damage. The

power cord must reach the work area with enough

extra length to allow free movement while working.

3. There must not be objects, such as utility lines,

nearby that will present a hazard while working.

General Operating Instructions

1. Make sure that the Switch is in the off-position,

then plug in the tool.

2. Turn on the tool.

3. Allow the tool to come up to full speed

before touching the wheel.

4. Apply the workpiece to the wheel,

allowing the tool to operate at full speed.

If the tool bogs down, use lighter pressure.

5. To create a smoother surface,

keep the workpiece moving over the wheel.

6. To prevent accidents, turn off the tool and unplug

the tool from its electrical outlet after use. Clean,

then store the tool indoors out of children’s reach.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Harbor Freight Tools 8 in. Bench Grinder with Gooseneck Lamp Manual Página 11