Harbor Freight Tools Gear Driven Ring Roller Manual descarregar pdf (Página 4)

Page 4SKU 36790

For technical questions, please call 1-800-444-3353.

Taper Pin (#20) into the hole as seen in Figure 1. If necessary, lightly tap the Taper Pin (#20)

into place.

Mounting

Step 1) Set the Roller on your appropriate mounting surface as desired.

Warning: The Metal Planetary Ring Roller must be securely mounted to an appropriate work surface

prior to use!

Step 2) Make certain that you can operate the Handle (#15) comfortably.

Step 3) Mark the appropriate mounting surface through the two holes located at the far ends of the

Base (#25).

Step 4) Remove the Metal Planetary Ring Roller from the appropriate mounting surface. Drill holes

through the mounting surface at the marked locations.

Step 5) Mount the unit using two bolts, lock washers, washers and nuts (in that order) sold separately.

Upper Drive Wheel (#4)

Lower Drive Wheel (#4)

Adjustable Wheel (#16)

Left Frame (#5)

Knob (#29)

Handle (#15)

Figure 2

1 2 3 4 5 6 7

Sem comentários

Harbor Freight Tools Gear Driven Ring Roller Manual Página 4